The parts of piston air compressor that need water to cool are cylinder, intercooler, aftercooler and lubricant cooler. For cylinders and intercoolers, one of the purposes of cooling is to reduce the exhaust temperature so that the exhaust temperature does not exceed the allowable range. It can be seen that the piston air compressor can not be cooled after cooling by water, cylinder and air compressor, and the exhaust temperature of air compressor rises sharply.
This will not only make the lubricating oil in the cylinder lose its lubricating performance, make the moving parts wear quickly, but also make the lubricating oil decompose, make the volatile components in the lubricating oil mix with air, and cause combustion, explosion and other accidents. Compressor for the cooler, air compressor cut off water will also make the cooler lose cooling effect.
Jinan air compressor
In this way, the air temperature fed into the air separation unit will rise greatly, which will destroy the normal working state of the air separation unit. The air compressor in Suzhou is a lubricant cooler. The water in the air compressor can not cool the lubricant well and reduce the temperature of the lubricant. In this way, the viscosity of lubricating oil decreases, the lubrication performance becomes worse, the wear of moving parts becomes worse, the service life of the machine is reduced, and the power consumption is increased. After the decomposition of heavy oil, the volatile components of oil enter the air, resulting in a series of accidents.
The above is the related content of Jinan air compressor manufacturer. For more information, please visit the website: .