Air compressor maintenance and disassembly should be in accordance with the structure of the different parts of the air compressor, pre-considered operating procedures, in order to avoid inversion, resulting in confusion, or eager to save trouble, violent disassembly knock, causing damage to parts, deformation.
The order of maintenance and disassembly of air compressor is generally opposite to that of assembly, that is, first disassembly of external accessories, then disassembly of internal parts and components, from the top to the bottom of the assembly in turn, and then disassembly of parts.
Air compressor should be used when repairing and disassembling.
大型空气压缩机的零件，部件都很重，拆卸时要准备 好起吊工具、绳套，并在绑吊时注意保护好部件，不要碰伤 和损坏。
Large air compressor parts, components are very heavy, when disassembly to be ready for lifting tools, rope sleeve, and when binding to protect the parts, do not touch or damage.
对拆卸下来的零件、部件要放在合适的位置，不要乱 放，对大件重要机件，不要放在地面上，应放在垫木上，例 如大型空气压缩机的活塞、气缸、曲轴、连杆等要特别防止 因放置不当而产生变形，小零件放在箱子里，要盖好。精密 零件要专门保管.
The disassembled parts and components should be placed in a suitable position, not in disorder, on large important parts, not on the ground, should be placed on the mat, such as large air compressor piston, cylinder, crankshaft, connecting rod, etc. to prevent special deformation due to improper placement, small parts in the box, to cover well . Precision parts should be specially kept.
拆下的零件要尽可能的按原来结构整放在一起。例如曲轴与各段轴承瓦等。对成套或不能互换的零件在拆卸前 要做好记号，拆卸后要放在一起，或用绳子串在一起，以免 搞乱，使装配时发生错误而影响装配质量。
The parts to be removed should be put together as far as possible. For example, crankshaft and bearing blocks. Before disassembly, marks must be made on the complete set or non-interchangeable parts. After disassembly, they should be put together, or string together with ropes, so as to avoid confusion and make assembly errors and affect assembly quality.