(1) Increased wear
As we all know, as long as there is wear in the work of machinery, under normal circumstances, due to smooth liquid, wear will reduce a lot, but long time and high speed work, wear is slowly increasing.
Take the SKF bearing of Shandong Fusheng air compressor as an example: under almost impossible conditions (such as long time idling, clean enough smooth liquid, good enough cooling system, and the use of ambient temperature, humidity, etc.), it can only be guaranteed for several years. As far as the compressor main engine is concerned, there are wear and tear of other parts besides bearings. If slight wear does not take the correct preventive measures, it will easily lead to increased wear, causing damage and wear of other primary components.
(2) Component Deformation
The main engine of air compressor is the core part of the compressor. Its internal parts are in high temperature and pressure environment for a long time, coupled with high-speed work, there must be part deformation for a long time. Together, the cause of deformation is also the use of environmental factors, and air compressor generally used in the environment will have dust and impurities, these fine solid substances into the machine, accumulated over time into larger solid blocks, it is possible to cause Yin and Yang rotor deformation, void increase, serious lead to the main engine jam.
(3) Cost addition
Here cost refers to maintenance cost and power cost. Because the main engine of air compressor has not been overhauled for a long time, the wear of parts increases, and some wear impurities remain in the main engine chamber, which will shorten the life of smooth liquid.
Together, due to impurities, the operation time of oil and gas separator core and oil filtration period is greatly shortened, which constitutes maintenance cost addition. In terms of power cost, because of the increase of friction and the decrease of contraction efficiency, it will certainly constitute an increase in power cost. The decrease of air volume and air quality caused by the main engine of the compressor will also directly increase the production cost.
(4) Component damage
The vulnerable parts of the main part of the air compressor mainly include gaskets, sealing rings, shaft oil seals, etc. Especially the shaft oil seals, which have been working at high temperature, high pressure and high speed for a long time, and their service life ratio is greatly shortened. The direct consequence of its damage is that it constitutes oil leakage of the compressor. If it is not found in time, it will constitute Yinyang rotor and bearing which will be burned due to lack of smooth.
This article is supported by Jinan Air Compressor. For more details, please click on our official website . We will provide you with satisfactory service wholeheartedly.