1. Check whether the oil level of oil and gas barrels can be between the two calibration lines of the oil level gauge. If there is a lack of oil level gauge, it should be supplemented. Make sure that there is no pressure in the system before refueling (oil level should be checked ten minutes after shutdown, which is slightly lower in operation than when shutdown).
2. Make sure there is no pressure in the system.
3. When a new screw air compressor starts for the first time or stops working for a long time, it is necessary to remove the air filter cover and take about 0.5 liters of smooth oil from the intake port to prevent oil loss and burning during the start-up opportunity.
4. Open slightly the drain valve at the bottom of the oil and gas barrel, drain the condensate and dirt accumulated at the bottom of the smooth oil, and open it when oil flows out to prevent premature emulsification and degeneration of the smooth oil.
5. Check whether the parts of the air compressor are in good condition, whether the maintenance and installation, instruments, valves, pipelines and joints are damaged or loosened.
6. Open the exhaust valve.
Screw air compressor only need to follow the steps mentioned above before starting, inspect and operate in accordance with the conventions, and can achieve a good start and easy maintenance. It is very critical to prolong the life of the machine. In the ordinary process of operation, pay more attention to the details, on the one hand, it can improve my operation skills, on the other hand, it is also a good self-care for the machine.
The wonderful content of this article is presented by Jinan Air Compressor. If you have different opinions, you are welcome to log in: message exchange, reprint please fill in the reprint source!