Am hooked!

mino · 06-18-2007, 08:56 AM

I’m hooked! I took the plunge in April and bought a Husqvarna Designer II and started to learn to digitize. Well, I got totally hooked and have now bought a 2nd hand PR600 6 needle machine. I never imagined how absorbing this digitizing could be. I’m totally loving it. And the difference in the stitch out between the two machines is amazing. OK, I know the Designer is a home/hobby machine and the PR600 is a semi commercial one, but I didn’t expect the difference in quality to be that much. If anyone is thinking of upgrading to a better machine, don’t hesitate – it’s well worth it. I’m still trying to get my head round the PE Design software after being used to Husqvarna’s, but a little time and patience I guess. It’s good I can use both to digitize until I get used to PE. I will also have to have a go at caps sometime, but reading the forum about caps, it’s a bit daunting. Will have to get some cheap ones to practice on as I’m sure I will have to throw loads away!!! Anyway, just wanted to encourage others who may be wondering what to do and if it’s worth it…... it is! BTW, am learning loads from the forum too, great site. Thanks. mino

digitizing.com · Sponsored Links

bob · 06-20-2007, 12:20 PM

Good for you...it is very nice when somebody is getting so passionate with our profession.

EmbroideryDigitizing · 06-24-2007, 10:55 AM

Great to know about your new machine and the hook up with the software !
This forum is certainly a great place for all of us to share our thoughts and knowledge.

Chao !

NovaFoil · 06-30-2007, 04:06 PM

Hi Mino,

I started digitizing 2 years ago for a textile company. I too got hooked right off the bat.
I work with Tajima DG/ML software with a Tajima Neo Machine which I hear are some of the best machines. I just love it! I could do this for the rest of my life lol

Frank

chinayalta · 08-26-2007, 07:30 PM

The price is olny $1.5 USD per 1000 stitches. no minimum ,furthermore, the maximum is only $120.00 USD.

edtan · 01-28-2008, 09:05 AM

I am planning to buy a 2nd PR600, i hear from Mino, is really reassuranciing, can others help me to decide if this is the best money can buy? We are using it to help some lower income household to earn some pocket money.

06-18-2007, 08:56 AM	#1
mino Junior Member Join Date: Apr 2007 Location: Weston super Mare, Somerset, UK. Posts: 22 iTrader: (0) Online Status:	Am hooked! I’m hooked! I took the plunge in April and bought a Husqvarna Designer II and started to learn to digitize. Well, I got totally hooked and have now bought a 2nd hand PR600 6 needle machine. I never imagined how absorbing this digitizing could be. I’m totally loving it. And the difference in the stitch out between the two machines is amazing. OK, I know the Designer is a home/hobby machine and the PR600 is a semi commercial one, but I didn’t expect the difference in quality to be that much. If anyone is thinking of upgrading to a better machine, don’t hesitate – it’s well worth it. I’m still trying to get my head round the PE Design software after being used to Husqvarna’s, but a little time and patience I guess. It’s good I can use both to digitize until I get used to PE. I will also have to have a go at caps sometime, but reading the forum about caps, it’s a bit daunting. Will have to get some cheap ones to practice on as I’m sure I will have to throw loads away!!! Anyway, just wanted to encourage others who may be wondering what to do and if it’s worth it…... it is! BTW, am learning loads from the forum too, great site. Thanks. mino

06-24-2007, 10:55 AM	#3
EmbroideryDigitizing Member Join Date: Sep 2006 Posts: 71 iTrader: (0) Online Status:	Great to know about your new machine and the hook up with the software ! This forum is certainly a great place for all of us to share our thoughts and knowledge. Chao ! __________________ [Only registered and activated users can see links. ] for just half the price !!! Over 1400 Satisfied Clients! Be another! [Only registered and activated users can see links. ]

01-28-2008, 09:05 AM	#6
edtan Just Joined Join Date: Jan 2008 Posts: 8 iTrader: (0) Online Status:	I am planning to buy a 2nd PR600, i hear from Mino, is really reassuranciing, can others help me to decide if this is the best money can buy? We are using it to help some lower income household to earn some pocket money. __________________ Sincerely, Ed Tan HP:65-98150037 [Only registered and activated users can see links. ]

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

06-20-2007, 12:20 PM	#2
bob Junior Member Join Date: Jan 2007 Posts: 48 iTrader: (0) Online Status:	Good for you...it is very nice when somebody is getting so passionate with our profession.

06-30-2007, 04:06 PM	#4
NovaFoil Just Joined Join Date: Jun 2007 Location: Noranda, Quebec, Canada Posts: 6 iTrader: (0) Online Status:	Hi Mino, I started digitizing 2 years ago for a textile company. I too got hooked right off the bat. I work with Tajima DG/ML software with a Tajima Neo Machine which I hear are some of the best machines. I just love it! I could do this for the rest of my life lol Frank

08-26-2007, 07:30 PM	#5
chinayalta Junior Member Join Date: Aug 2007 Location: China Posts: 20 iTrader: (0) Online Status:	The price is olny $1.5 USD per 1000 stitches. no minimum ,furthermore, the maximum is only $120.00 USD.