Thread pull outs

Sloane · 02-05-2008, 10:33 PM

My new 6 head Tajima is giving me a time with tails..or pull outs after trims. The design I was working with today is very old...digitized probably 12 years ago..it's the text I am havig issues with. Should I re do the text on the new software that I have?

digitizing.com · Sponsored Links

make_edit · 02-06-2008, 10:39 AM

You can adjust the length of the trim on the machine(if that is what you are talking about..the length of the left over thread after trim..I have a six head tajima as well and had the same problem at first...if that is the same problem let me know and I will tell ya where to adjust it.)

02-05-2008, 10:33 PM	#1
Sloane Just Joined Join Date: Feb 2008 Posts: 2 iTrader: (0) Online Status:	Thread pull outs My new 6 head Tajima is giving me a time with tails..or pull outs after trims. The design I was working with today is very old...digitized probably 12 years ago..it's the text I am havig issues with. Should I re do the text on the new software that I have?

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

02-06-2008, 10:39 AM	#2
make_edit Moderator Join Date: Jun 2007 Location: South Carolina,USA Posts: 145 iTrader: (0) Online Status:	You can adjust the length of the trim on the machine(if that is what you are talking about..the length of the left over thread after trim..I have a six head tajima as well and had the same problem at first...if that is the same problem let me know and I will tell ya where to adjust it.)